MicroVAX 3100 Model 88 and 98 Systems include

·     Minitower enclosure with CPU/FPU

·     64 MB or 128 MB SIMM memory

·     DIGITAL NAS Base Server 200

·     802.3/Ethernet interface (ThinWire/Thick wire) with terminators

·     Ethernet kit; includes ThinWire T-connector with BNC terminators and 15-pin thick wire terminator

·     Synchronous SCSI-2 interface for connecting internal and external SCSI devices; external connection via a
50-pin external SCSI-2 connector

·     Three DEC-423 asynchronous serial lines (MMJ data leads only)

·     EIA-232 asynchronous serial line with modem control (25-pin D-subminiature connector)

·     H8575-A 25-pin-to-MMJ DEC-423 to EIA-232 adapter

·     7.6-meter (25-foot) console terminal cable

·     120 V power cord (country-specific power cord required for 240 V use; see Step 9)

·     Universal power supply that automatically adjusts to
88-132 Vac or 176-264Vac

·     Hardware documentation (EK-MV489-UI for Model 88 and 98

·     1.05 GB RZ26N disk (Uses one 3.5” half-height SCSI bay)

·     600 MB CD-ROM (Uses one 5.25” removable media bay)

·     OpenVMS base license (with POSIX)

·   

·     System supports maximum of six internal devices in any of the following combinations:

-     Six RZ26 or RZ28 half-height disk drives, or

-     Five RZ26 or RZ28 disk drives and one removable media device

-     Three RZ26 or RZ28 half-height disk drives and three removable media devices

-     Maximum of three RZ29B disk drives supported, must be installed in removable media device bays

·     RZ26N disk drive in Advantage Server systems include Factory Installed Software (FIS)

·     Order a load device (TLZ09) if necessary

·     OpenVMS Cluster satellite members or systems being loaded over the network do not require a load device.

·

Model 88 and 98 System Diagram

 

 

1    Front Door

2    CD-ROM

3    System Disk Drive

4    System board

5    1st SIMM board (standard)

6    2nd SIMM board (optional)

7    Power Supply

8    Rear drive bay

9    DHW42 Asynchronous option

10  DSW43 synchronous option

 

 

1    Front door

2    Power switch

3    Disk drive LED

4    Power LED

5    Halt switch; halts system and returns it from operating system to console mode

6    RZ2x SCSI disk (non-accessible)

7    Accessible/non-accessible bay for 3.5” or 5.25” device

8    Accessible/non-accessible bay for 3.5” or 5.25” device

9    CD-ROM volume switch

10  CD-ROM headphone jack

11  CD-ROM activity light

12  CD-ROM eject button

Model 88 and 98 System Diagram

 

1    SCSI port (terminated required)

2    2A AC power outlet connection

3    AC power input connector

4    Pre-installed software label

5    System identification label

6    Lockdown hasp

7    ThinWire Ethernet

8    ThinWire Ethernet LED

9    Thick wire Ethernet

10  Thick wire Ethernet LED

11  Modem port (with adapter)

12  MMJ port (for console only)

13  MMJ port

14  MMJ port

15  DHW42 Asynchronous communication (optional)

16  DSW43 Synchronous communication (optional)

17  KZDDA SCSI port (optional)